Your One Stop For Forensic Solutions

NOW AVAILABLE WITH WINDOWS 7 ULTIMATE 64 BIT!

FRED SR (Dual Xeon) is the highest performance member of the FRED family of forensic workstations. FRED SR has all the functional capabilities of a FRED system with the addition of components optimized for the absolute highest level of processor, memory, and I/O performance.

Dual Processor system implementations have traditionally been server centric with: outdated chipsets, poor memory bandwidth, poor I/O bandwidth, and limited support for integrated peripherals. Digital Intelligence has designed the first Dual Processor system with all the pre-requisite performance, flexibility, and reliably required of a Forensic Recovery of Evidence Device (FRED). This system is built on a dual-processor 64-bit Xeon Motherboard, with outstanding flexibility, integrated peripheral support, and performance far beyond anything previously seen in a Forensic Workstation.

The UltraBay II - Integrated IDE, SATA, SCSI, USB and Firewire Write Blockers

Now shipping on selected models of the Industry Leading FRED Family of Forensic Workstations.

• The industry's first FireWire Write-Blocker.
• Completely integrated / internal system solution.
• Integrated Write Blocked (Read-Only) Ports:
  • SATA
  • IDE
  • SCSI (both SE and LVD Devices)
  • USB
  • FireWire 1394b/800 (1394a/400 backward compatible).
• Integrated Read/Write Ports (Hubs):
  • FireWire 1394b/800 (1 Port)
  • USB 2.0 (2 ports)
• Integral LCD/keypad for viewing device and bridge status/info and configuration.
• Full multi-LUN FireWire acquisition support is provided for Write Protected imaging of Apple Mac systems
  booted to FireWire device mode.
• The UltraBay II provides both dedicated Write Protected USB and FireWire ports, as well as dedicated
  Read/Write USB and FireWire ports.
• SATA/IDE/SCSI ports can be temporarily switched between Write Blocked (Read-Only) and Read/Write modes via LCD/keypad configuration. To maximize forensic safety, the UltraBay II automatically reverts to Write-Blocked mode at power-up and after a drive is detached:
  • The SATA/IDE/SCSI ports auto-configure to Write Protected (Read-Only) mode at every power up.
  • The SATA/IDE/SCSI ports may be manually configured to allow Read/Write operation using the
    front panel LCD Control after a drive is connected.
  • The SATA/IDE/SCSI ports automatically revert to Write Protected (Read-Only) operation after the drive is removed.
• The UltraBay II has both FireWire800 and SATA internal connections to the FRED System for write blocked services. Future firmware updates will allow simultaneous connection and smart inter-operation between FW800 and SATA interfaces for maximum aggregate performance and functionality.
• Firmware updates available at no charge through Tableau Firmware Update. Unlike less-functional
  integrated solutions, all firmware updates can be applied using existing communication channels and do not require labor-intensive temporary re-cabling of the forensic workstation.
• Full HPA/DCO support for SATA & IDE devices.
• SCSI supports SE and LVD devices.
• The USB 2.0 write-blocked port has same range of device support as The UltraBlock USB (T8). Additionally, the USB implementation is about 25-35% faster than the standalone UltraBlock USB (T8).
• FireWire write-blocked port has 9-pin FW800 connector and supports both FW400 and FW800 devices.
• The UltraBay II is supported by Tableau Disk Monitor application.
• The UltraBay II is supported by Tableau "tabphys" library. This will allow it to be recognized by Encase upon release of the updated Encase imager by Guidance Software.

The UltraBay II is exclusively available with select Digital Intelligence FRED systems and is not available separately or from any other source.

New Ventilated Imaging Shelf

Selected FRED systems have also been upgraded to include our new ventilated imaging shelf for maximum drive cooling during the imaging process:

• Integrated Retractable imaging shelf (fully retracts into the system when not in use).
• Dual fans for maximum cooling and surface coverage.
• On/Off switch to control airflow.
• Slotted, cushioned, non-conductive, non-skid, surface supports all popular drive sizes (3-1/2", 2-1/2", 1.8", etc).

FRED SR is an FTK 3 Solution

FRED SR meets or exceeds the recommended system specifications for FTK 3.

Read our Whitepaper entitled Quantifying Hardware Selection for FTK3.

Dual 64 Bit Xeon Processors

• Xeon 5620 2.40Ghz Standard
• Dual Quad Core (8 Processors Total)
• Both 32 and 64 Bit Capable
• Shipping with a full 64 Bit Windows 7 O/S

Two Independent CPU-Dedicated Memory Banks

• Eliminates CPU (bandwidth) contention for shared memory access of a single bank of memory
• 12GB (6GB/Processor) standard
• Up to 144GB (72 GB/Processor) maximum

Baseline FRED SR Specifications

• 23 1/2" High (25 1/2" w/Wheels), 16 1/8" Wide, 28" Deep - 140 lbs
• ATX Double-Wide Black Server Case 23 x 5¼" Bays, 1100W Modular Power Supply, 10 Cooling Fans
• Dual Intel Xeon Motherboard (2xLGA1366 sockets supporting 32 and 45nm Intel Xeon® 5500/5600 Series Quad and Hex Core CPU's). Intel 5520 Chipset IOH and ICH10R I/O Controller.
• Two Intel Xeon 5620 (2.40 Ghz, 12Mb) Quad-Core CPU's (8 Processors Total)
• 12.0 GB Dual-Channel 128 Bit DDR3-1333 Registered ECC Memory (Upgradeable to 144GB)
• 1 x 150 Gb 10,000 RPM 3.0 Gb/s SATA Hard Drive in Shock-Mounted Tray � OS Drive
• 1 x 1.5 Tb 7200 RPM 3.0 Gb/s SATA Hard Drive in Shock-Mounted Tray � Data Drive
• 4xPCIex16 (Gen2), 1xPCIex8, 1xPCI32 Slots
• Nvidia GT240 PCI-Express Video Card (1GB) with HDMI and Dual Monitor Output
• LTO Ultrium 4 Internal Tape Drive (800GB Native / 1.6TB Compressed)
• RAID Configuration:
  - 12 Channel PCIe SATA RAID Controller
  - 10 x Shock Mounted Serial ATA (SATA) Removable Hard Drive Bays
  - 5 x 500GB 7200RPM SATA Hard Drives (2.5TB RAID0)
  - 5 x 1.5TB 7200RPM SATA Hard Drives (7.5TB RAID0)
• Dual 10/100/1000 MB/s Gigabit Ethernet Network Adapters (Intel)
• 8-Channel Audio Controller
• 6 ports (6 Drives) Primary 3.0 Gb/s Serial ATA (SATA) Controller
• 1 Serial (COM1) Port
• 1 RJ-45 Port for iKVM (Requires ASMB4 Card)
• 2 PS/2 Ports (Keyboard & Mouse)
• 5 USB 2.0 Ports - 2 Back Mounted, 3 Front Mounted (1 Write Blocked)
• 3 IEEE 1394b (800 MB/Sec) FireWire Ports - 1 Back Mounted, 2 Front Mounted (1 Write Blocked)
• Digital Intelligence UltraBay Hardware Write-Blocker:
  - Integrated IDE Drive Write Blocker
  - Integrated SATA Drive Write Blocker
  - Integrated SCSI Drive Write Blocker
  - Integrated USB Write Blocker
  - Integrated Firewire IEEE 1394b Write Blocker
• Digital Intelligence Integrated Forensic Media Card Reader - One Switchable Read-Only/Read-Write (MSC, MS Pro, SMC, CFC, MD, XD, SDC, and MMC Memory Card compatible)
• 2 x Shock Mounted SATA Removable Hard Drive Bays (IDE Capable)
• 4 x HotSwap Shock Mounted Universal Removable Hard Drive Bays (IDE/SATA Compatible)
• BD-R/BD-RE/DVD ± RW/CD ± RW Blu-ray Burner Dual-Layer Combo Drive
• Extendable/Retractable Imaging Workshelf with Integrated Ventilation
• Wireless 104 Key Microsoft Keyboard
• Wireless Microsoft Intellimouse
• USB 3 1/2" Floppy Drive with Write Protect Switch
• 22" Widescreen LCD Monitor with Built-in Speakers

Toolbox Containing

• Adapters, Terminators, and Cables: All the necessary cables, adapters, and terminators to image and process internal/external SCSI drives, 1.8 inch IDE (iPod) drives, 2.5 inch IDE (laptop) drives, and 3½ and 5¼ inch IDE drives.
• Digital Camera: Useful to document your suspects environment and hardware.
• Security Screwdriver Set: A varied assortment of popular security bits for opening computer enclosures that may have been locked down in a corporate environment.

Software

• Microsoft Windows 98SE Standalone DOS (Pre-Installed & Configured)
• Microsoft Windows 7 Ultimate 64 Bit With Windows XP Mode (Pre-Installed & Configured)
• Suse Linux Professional (Pre-Configured)
• Norton GHOST
• DVD/CD Authoring Software
• DriveSpy, Image, PDWipe, PDBlock, PART